Due to popular demand, MikroTik brings you a sturdy and affordable outdoor enclosure for GPeR units. It can be easily mounted on walls and poles.

Despite the name, meticulous testing revealed that in real life the enclosure has an IP68 rating with protection from immersion in water, as well as protection from dust. Get an outdoor enclosure for the GPeR to safely extend Ethernet network in mines, caves, maintenance shafts or outdoors.

MikroTik GPeR can be purchased separately

MikroTik's RB-FTC is a Gigabit Fibre to Copper converter. Unlike many other media converters available on market, FTC has an outdoor waterproof case with lock screw.

The device supports 12-57V PoE with 802.3af/at. It is supplied with a PoE injector and power supply. The case has a mounting system that is secured by a screw from inside the lockable case, making the device hard to access by unauthorised individuals.

*Note: SFP module sold separately.
SKU RB-FTC
Manufacturer MikroTik
Manufacturer Product Code RBFTC11

Type Approval Exemption

Specifications Ethernet Ports: 1x 10/100/1000
Max. Power Consumption: 3W
Operating Temperature: -40°C to 70°C
PoE Input: 12V-57V (Passive PoE, 802.3af/at)
PoE Output: None
Power Input: 24V 0.3A Power Supply (Included)
SFP Ports: 1x 1.25Gbps
Supported Voltage Range: 12V-57V

Dimensions: 185 x 85 x 30mm

MikroTik's RB-GROOVEA52 is a small, outdoor, fully-featured wireless RouterBOARD powered by RouterOS. It is weatherproof, durable and ready to use. It has one 10/100 Ethernet port with PoE support and a built-in wireless radio. The RB-GROOVEA52 has software selectable 2 or 5GHz wireless mode, and 500mW output power. The GrooveA52 model has 64MB of RAM and RouterOS license (support for AP, point-to-point or CPE)

With the Nv2 TDMA technology, up to 125Mbit aggregate throughput is possible. It has a built-in N-male connector, and pole attachment points, so you can attach it directly to an antenna, or you can use a standard antenna cable. LED signal indicators assist with installation and alignment.

Box contains: Groove unit, mounting loops, PoE injector, power adapter, Omni antenna
Antenna Gain: 2.4GHz/5.8GHz: 6dBi / 8dBi (Detachable)
Beam-width: Antenna Dependent
Data Rate: 2.4GHz/5GHz: 150Mbps
Ethernet Ports: 1x 10/100
Hardware Button: Reset
Max. Power Consumption: 6W
Mounting: Pole-Mount
Operating System: RouterOS (Level 4 Licence)
Operating Temperature: -40°C to 70°C
PoE Input: 9V-30V (Passive PoE)
PoE Output: None
Power Input: 24V 0.8A Power Supply (Included)
Serial Interface: None
SIM Slots: None
Supported Voltage Range: 9V-30V
USB Ports: None

Dimensions: 177 x 44 x 44mm

MikroTik's RB-TAG-IN is a slim Indoor IoT Bluetooth tag with built in accelerometer. Ideal for indoor tracking with the MikroTik KNOT or other IoT asset-tracking installations.
Antenna Gain: 1.5dBi
Battery: 220 mAh
Beam-width: 360°
Bluetooth Version: 5.2
Operating Temperature: 0°C to 70°C
Rating: IP55
Sensors: Accelerometer

Dimensions: 37 x 22 x 6 mm
Weight: 7g

MikroTik LHG 2 (Light Head Grid - 2.4GHz)

The Light Head Grid (LHG) is a compact and light 2.4GHz 802.11b/g/n wireless device with an integrated dual polarization 18 dBi grid antenna at a revolutionary price. It is perfect for point to point links or for use as a CPE at longer distances and supports Nv2 TDMA protocol.

The grid design ensures protection against wind, and the fact that the antenna element is built into the wireless unit means no loss on cables.

The device comes disassembled for compact shipping, but is very easy to assemble and includes a simple to use grounding attachment point. The package also contains a small adapter for tilting the antenna five degrees from the original position.

MikroTik LHG 2 XL (Light Head Grid - 2.4GHz)


The Light Head Grid (LHG) is a compact and light 2.4GHz 802.11b/g/n wireless device with an integrated dual polarization 21 dBi grid antenna for longer distance links. It is perfect for point to point setups or for use as a CPE at longer distances and supports Nv2 TDMA protocol.


The grid design ensures protection against wind, and the fact that the antenna element is built into the wireless unit means no loss on cables.

The device comes disassembled for compact shipping, but is very easy to assemble and includes a simple to use grounding attachment point. The package also contains a small adapter for tilting the antenna five degrees from the original position.

MikroTik LHG 5 (Light Head Grid)

The Light Head Grid (LHG) is a compact and light 5GHz 802.11 a/n wireless device with an integrated dual polarization 24.5 dBi grid antenna at a revolutionary price. It is perfect for point to point links or for use as a CPE at longer distances and supports Nv2 TDMA protocol.

The grid design ensures protection against wind, and the fact that the antenna element is built into the wireless unit means no loss on cables.

The device comes disassembled for compact shipping, but is very easy to assemble and includes a simple to use grounding attachment point. The package also contains a small adapter for tilting the antenna five degrees from the original position.

MikroTik LHG 5 (Light Head Grid)

The Light Head Grid (LHG) is a compact and light 5GHz 802.11 a/n wireless device with an integrated dual polarization 24.5 dBi grid antenna at a revolutionary price. It is perfect for point to point links or for use as a CPE at longer distances and supports Nv2 TDMA protocol.

The grid design ensures protection against wind, and the fact that the antenna element is built into the wireless unit means no loss on cables.

The device comes disassembled for compact shipping, but is very easy to assemble and includes a simple to use grounding attachment point. The package also contains a small adapter for tilting the antenna five degrees from the original position.

MikroTik's RB-LHG5-3 offers 3x RB-LHG5 units in a single package. The RB-LHG5 is a compact and light 5GHz 802.11a/n wireless device with an integrated dual polarization 24.5 dBi grid antenna. It is ideal for point-to-point links or for use as a CPE at longer distances and supports Nv2 TDMA protocol. The grid design ensures protection against wind, and the fact that the antenna element is built into the wireless unit means no loss on cables. The RB-LHG5 supports 5150MHz-5875MHz frequency range.

The 3-pack saves on packing space and is therefore ideal for orders where courier costs are a consideration.
Antenna Gain: 24.5dBi
Beam-width: 7°
Data Rate: 5.8GHz: 300Mbps
Ethernet Ports: 1x 10/100
Hardware Button: Reset
Max. Power Consumption: 6W
Mounting: Pole-Mount
Operating System: RouterOS (Level 3 license)
Operating Temperature: -40°C to 70°C
PoE Input: 11V - 30V (Passive PoE)
PoE Output: None
Power Input: 24V 0.38A Power Supply (Included)
Serial Interface: None
SIM Slots: None
Supported Voltage Range: 11V-30V
USB Ports: None

Dimensions: Ø 391 x 222 mm

MikroTik LHG 5 ac

The LHG 5 ac is a compact and light 5GHz 802.11ac wireless device with an integrated dual polarization 24.5 dBi grid antenna at a revolutionary price. It is perfect for point to point links or for use as a CPE at longer distances and supports Nv2 TDMA protocol.

The device includes one 10/100/1000 Mbit Ethernet port to fully utilize speeds that 802.11ac protocol provides.


This is the LHG 5 ac international version, which supports the 5150MHz-5875MHz range (Specific frequency range can be limited by country regulations).

MikroTik's RB-LHG60 is an outdoor, high-speed 60GHz CPE unit which, can be used to form either a Point-to-Point or Point-to-Multipoint link in the clean 60GHz spectrum. Pair up to 8 units with a MikroTik 60GHz Access Point or create a PtP link at a distance of up to 1.5km. The unit is equipped with a Gigabit Ethernet Port for high-speed connections and is shipped with an LHG mount and aim tool for precision alignment.
Antenna Gain: Maximum of 42dBi
Beam-width: 3°
Data Rate: 60GHz: 1Gbps
Ethernet Ports: 1x 10/100/1000
Hardware Button: Reset
Max. Power Consumption: 7W
Mounting: Pole-Mount
Operating System: RouterOS (Level 3 license)
Operating Temperature: -40°C to 70°C
PoE Input: 12V-57V (Passive PoE; 802.3af/at)
PoE Output: None
Power Input: 24V 0.38A Power Supply (Included)
Serial Interface: None
SIM Slots: None
Supported Voltage Range: 12V-57V
USB Ports: None

Dimensions: Ø 391 x 222mm

MikroTik LHG HP5 (High Powered)

The Light Head Grid (LHG) is a compact and light 5GHz 802.11 a/n wireless device with an integrated dual polarization 24.5 dBi grid antenna at a revolutionary price. The LHG HP5 comes with two times more output power than our regular LHG 5 - up to 630 mW, and is designed to reach up to 60% longer distances. It is perfect for point to point links or for use as a CPE at longer distances and supports Nv2 TDMA protocol.

The grid design ensures protection against wind, and the fact that the antenna element is built into the wireless unit means no loss on cables.

The device comes disassembled for compact shipping but is very easy to assemble. The package also contains a small adapter for tilting the antenna five degrees from the original position.

MikroTik's RB-LHGLTE6 is ideal for remote locations within cellular network coverage. Mount it outdoors, on a pole, mast or any tall structure, to enable connection even where cell phones fail. Due to its large-sized, high-gain antenna, the RB-LHGLTE6 kit can connect to cell towers in extremely rural locations, giving you the ability to provide last mile internet access where nothing else is available.

The RB-LHGLTE6 kit features a Cat6 LTE modem which enables carrier aggregation, allowing a device to use multiple bands simultaneously - A great advantage when there are multiple LTE users in the area. It provides better responsiveness in a crowded environment and higher efficiency in weaker signal situations.
Antenna Gain: LTE 17dBi
Beam-width: 25°
Data Rate: 300 Mbps Downlink; 50 Mbps Uplink
Ethernet Ports: 1x 10/100/1000
Hardware Button: Reset
Max. Power Consumption: 6W
Mounting: Pole-Mount
Operating System: RouterOS (Level 3 License)
Operating Temperature: -30°C to 70°C
PoE Input: 12V – 57V (Passive PoE; 802.3af/at)
PoE Output: None
Power Input: 24V 0.38A Power Supply (Included)
Serial Interface: None
SIM Slots: 1 (Micro SIM)
Supported Voltage Range: 12V-57V
USB Ports: None

Dimensions: 391 x 391 x 227 mm

MikroTik LHG Lite60


The LHG Lite60 is a new model in our 60 GHz lineup. This is a low cost CPE unit for connecting to a 60 GHz AP at longer distances, enabling you to build a cost effective point to multipoint setup in the clean 60 GHz wireless spectrum.


Connect up to eight of these CPE units to a 60 GHz access point, such as our wAP60G AP. For links up to 800 meters, this is the best alternative for wireless connections where 2 and 5 GHz wireless space is crowded and unreliable, at a fraction of the cost. Also, it's possible to make point-to-point link with two LHG Lite60.


Lightweight, compact and very affordable, this is a 60 GHz device like no other before.

MikroTik LHG Mount (Metal Bracket)

The LHG mount is a basic pole mount adapter made from metal for LHG series products.

• Simple and low cost.

• Supports all LHG series, products, including LHG XL.

• Made from metal.

• Package also includes a U-bolt and a K-58 mounting kit.

MikroTik's RB-LHG5ACXL4 is a 4-pack option featuring a long-range 5GHz 802.11ac (WiFi 5) wireless radio with an integrated 27dBi grid antenna. The RB-LHG5ACXL4 is ideal for point-to-point links or for use as a CPE at longer distances.
Antenna Gain: 27dBi
Beam-width: 7°
Data Rate: 5.8GHz: 867Mbps
Ethernet Ports: 1x 10/100/1000
Hardware Button: Reset
Max. Power Consumption: 7W
Mounting: Pole Mount
Operating System: RouterOS (Level 3 Licence)
Operating Temperature: -40°C to 70°C
PoE Input: 10-30V (Passive PoE)
PoE Output: None
Power Input: 24V 0.38A Power Supply (Included)
Serial Interface: None
SIM Slots: None
Supported Voltage Range: 10-30V
USB Ports: None

Dimensions: Ø 550 x 245 mm

MikroTik's ANT-LORA is a 6.5 dBi Omni Antenna for the 824-928MHz frequency range. This device includes a 1m SMA cable and a mechanical holder for quick and easy mounting on masts 25-50mm.
Antenna Gain: 6.5dBi (868 MHz) / 4.5dBi (915 MHz)
Beam-width: Horizontal: 360° Vertical: 30°
Connector: Antenna: 1x SMA Female
Frequency Range: 824 - 928 MHz
Polarization: Vertical & Horizontal

Dimensions: 42 x 68 x 495 mm
Weight: 600g

MikroTik's RB-LTAPHDLTE6 is a compact, 4G capable, weatherproof, wireless access point – ideal for a busy, urban environment or off-the-grid outdoor networking. It has a built-in Cat6 cellular modem that supports 4G connectivity out of the box with up to 300 Mbps download speed. LTE6 also enables carrier aggregation and allows the device to use multiple bands simultaneously, which is a great advantage when there are many LTE users in the area.

*Note: To make use of more than 1 SIM at a time, a second PCI LTE module is required.
Antenna Gain: LTE: 4dBi (with UFL connector); Wireless: 2.5dBi
Beam-width: 360°
Data Rate: LTE: 300Mbps Downlink; 50Mbps Uplink ; Wireless: 2.4GHz 300Mbps
Ethernet Ports: 1x 10/100/1000
Hardware Button: Reset
Max. Power Consumption: 24W
Mounting: Wall-Mount
Operating System: RouterOS (Level 4 License)
Operating Temperature: -30°C to 70°C
PoE Input: 12V-30V Passive PoE
PoE Output: None
Power Input: 24V 1.2A Power Supply (Included) or Automotive Connector
Serial Interface: None
SIM Slots: 3 Mini SIM Slots
Supported Voltage Range: 12V-30V
USB Ports: 1x USB 2.0 (can only be used if miniPCIe slot #1 is not used)

Dimensions: 170 x 162 x 40mm

MikroTik's RB-LTAP is a small weatherproof wireless access point with integrated LTE antennas and a miniPCI-e slot.

The LTAP mini has one 10/100 Ethernet LAN port for your wired devices and an RS232 serial port gives you console access for debugging. The unit has several powering options: 8-30V via the DC Jack, Passive and 803.3af PoE via the Ethernet port or power it up using the 5V microUSB.

LTAP mini has a special enclosure with a wall mounting kit, two SIM slots to alternate between cellular providers, and integrated GPS support, making this a perfect device for use in moving vehicles like cars, buses or trains. Use the built-in GPS module to track the location of your vehicle in real time.

Combine this with a ANT-MLTE to improve signal and performance or RB-GPS for use as a tracking solution.

*Note: The second SIM slot is for scripted failover configurations only. It does not automatically failover or do load balancing.
Antenna Gain: LTE: 3.5dBi (with UFL connector); Wireless: 1.5dBi
Beam-width: 360°
Data Rate: LTE: 150Mbps Downlink; 50Mbps Uplink ; Wireless: 2.4GHz 300Mbps
Ethernet Ports: 1x 10/100
Hardware Button: Reset; Mode
Max. Power Consumption: 9W
Mounting: Wall-Mount
Operating System: RouterOS (Level 4 Licence)
Operating Temperature: -40°C to 70°C
PoE Input: 10V-57V (Passive PoE and 802.3af/at)
PoE Output: None
Power Input: 24V 1.2A Power Supply (Included)
Serial Interface: 1x RS232
SIM Slots: 2 Mini SIM slots
Supported Voltage Range: PoE in: 10V-57V (Passive PoE and 802.3af/at with unshielded cable) DC jack: 8V-30V or Micro USB: 5V
USB Ports: None

Dimensions: 139 x 77 x 28.5mm

MikroTik's RB-LTAP is a small weatherproof wireless access point with integrated LTE antennas and a miniPCI-e slot.

The LTAP mini has one 10/100 Ethernet LAN port for your wired devices and an RS232 serial port gives you console access for debugging. The unit has several powering options: 8-30V via the DC Jack, Passive and 803.3af PoE via the Ethernet port or power it up using the 5V microUSB.

LTAP mini has a special enclosure with a wall mounting kit, two SIM slots to alternate between cellular providers, and integrated GPS support, making this a perfect device for use in moving vehicles like cars, buses or trains. Use the built-in GPS module to track the location of your vehicle in real time.

Combine this with a ANT-MLTE to improve signal and performance or RB-GPS for use as a tracking solution.

*Note: The second SIM slot is for scripted failover configurations only. It does not automatically failover or do load balancing.
Antenna Gain: LTE: 3.5dBi (with UFL connector); Wireless: 1.5dBi
Beam-width: 360°
Data Rate: LTE: 150Mbps Downlink; 50Mbps Uplink ; Wireless: 2.4GHz 300Mbps
Ethernet Ports: 1x 10/100
Hardware Button: Reset; Mode
Max. Power Consumption: 9W
Mounting: Wall-Mount
Operating System: RouterOS (Level 4 Licence)
Operating Temperature: -40°C to 70°C
PoE Input: 10V-57V (Passive PoE and 802.3af/at)
PoE Output: None
Power Input: 24V 1.2A Power Supply (Included)
Serial Interface: 1x RS232
SIM Slots: 2 Mini SIM slots
Supported Voltage Range: PoE in: 10V-57V (Passive PoE and 802.3af/at with unshielded cable) DC jack: 8V-30V or Micro USB: 5V
USB Ports: None

Dimensions: 139 x 77 x 28.5mm