MikroTik's RB-CUBE60PS is an outdoor, 802.11ay 60GHz 60° Integrated Sector with automatic 5.8GHz 802.11ac failover, 1x Gigabit Ethernet and a durable, unobtrusive enclosure. Pair the unit with up to x8 60GHz CPE's to create a Point-To-Multi-Point Link for distances up to 800m.
Antenna Gain: 5.8GHz: 11.5dBi : 60GHz: N/A Recommended for up to 800m
Beam-width: 5.8GHz: 35° : 60GHz: 60°
Data Rate: 60GHz: up to 1Gbps+ : 5.8GHz: 433Mbps
Ethernet Ports: 1x 10/100/1000
Hardware Button: Reset
Max. Power Consumption: 13W
Mounting: Pole-Mount
Operating System: RouterOS (Level 4 Licence)
Operating Temperature: -40°C to 70°C
PoE Input: 802.3af/at or 18V-57V (Passive PoE)
PoE Output: None
Power Input: 24V 0.8A Power Supply (Included)
Serial Interface: None
SIM Slots: None
Supported Voltage Range: 18-57V
USB Ports: None

Dimensions: 115 x 211 x 90 mm

MikroTik's ANT-O25 is a dual band, outdoor, RP SMA whip antenna featuring 3.3dBi gain on 2.4GHz and 5.5 - 7.1dBi on 5.8GHz. Pair this antenna with any dual band access point with RP SMA Female connectors to create a dual band outdoor access point.
Antenna Gain: 2.4GHz 3.3dBi ; 5.8GHz 5.5-7dBi
Connectors: RP SMA Male

You can’t buy safety, but you can buy MikroTik devices to keep your setup safe. Take a look at the GESP product line. It consists of a new revision of the classic MikroTik GESP surge protector and a brand new device – the GESP+POE-IN, a passive PoE injector with surge protection. Together these two devices offer maximum security and peace of mind.


Here’s what a typical use-case would be like. You have a mast with some antennas. And some switches on the ground. Put the GESP surge protector up there. It comes sealed inside a new and improved IP67 weatherproof enclosure. Your antennas are now safe during a lightning storm. Now add the GESP+POE-IN injector below the mast - to protect the switches and to power the antennas.


Don’t forget about the grounding wire! Secure it to the rackmount, mast, or any other structure that is connected to the ground. For maximum protection, you should use a surge protector on both ends of long cables.


These small devices can make all the difference when it comes to lightning strikes or static build-up.


The GESP units can usually absorb multiple impacts, but make sure to check their condition after each surge. For attachment of GESP units, we recommend using PVC zip ties. Just don’t make it too tight. You know what they say – hope for the best, prepare for the worst. This small investment can save lots of time and money, so why risk it? Grab a GESP & GESP+POE-IN and put your mind at ease!

MikroTik's RB-GPEN21 is a smart media converter with PoE pass-through running SwOS. It provides a range of useful software features such as Interface management and monitoring, GPEN link fault detection, VLAN support, SNMP reporting and Basic traffic shaping. This unit has 2 Gigabit Ethernet ports as well as an SFP port for fibre connectivity. The RB-GPEN21 can be used either to power a fibre module or to provide PoE to power an Ethernet uplink using RB-GPER.

*Note: Power supply not included.

Easy Printable Label
For your convenience, we have created an editable label template available for download under this product's 'More Information' tab. Once downloaded to your computer, the template allows you to input your company information and logo. Label product: Redfern 66 x 20.69 mm (39 UP).
SKU RB-GPEN21
Manufacturer MikroTik
Manufacturer Product Code GPEN21
GPEN Concept
Label - Redfern 39UP
Specifications Ethernet Ports: 2x 10/100/1000
Hardware Button: Mode
Mounting: Wall-Mount
Operating System: SwOS
Operating Temperature: -20°C to 70°C
PoE Input: 802.3af/at
PoE Output: 12V-57V Passive PoE
Power Input: Passive PoE
SFP Ports: 1x 1.25Gbps
Supported Voltage Range: 12V-57V

Dimensions: 92 x 104 x 24mm

MikroTik GPeR

The GPeR unit allows to extend Ethernet cable by additional hop (< 100 - 150 m to regular network devices, and up to 210 m to another GPeR unit) up to 1,500 m.

Handy for highrise buildings, multi-apartment buildings, with many floors and sections, where very long Ethernet cables might be a problem.

Maximium allowed length of CAT6 Ethernet cable between GPeR and power source/router is up to 100 m (depending on cable quality, high quality - up to 150 m).

Maximium allowed distance of CAT6 Ethernet cable between two GPeR devices is up to 210 m (depending on cable quality).

Use case 1: Extension of Ethernet link to up to 1,5 km if one side have PoE source (up to 3 km both sides of the link have PoE sources).

Use case 2: Home user connects his WiFi AP to GPEN11, which then outputs PoE (Power over Ethernet), Ethernet is extended with GPeR units then on the roof you have a netPower series switch (coming later this year), which takes power from all the apartments (from GPEN11), after that the switch is connected to the uplink connection, for example with our 60 GHz series of device.

Due to popular demand, MikroTik brings you a sturdy and affordable outdoor enclosure for GPeR units. It can be easily mounted on walls and poles.

Despite the name, meticulous testing revealed that in real life the enclosure has an IP68 rating with protection from immersion in water, as well as protection from dust. Get an outdoor enclosure for the GPeR to safely extend Ethernet network in mines, caves, maintenance shafts or outdoors.

MikroTik GPeR can be purchased separately

MikroTik's RB-FTC is a Gigabit Fibre to Copper converter. Unlike many other media converters available on market, FTC has an outdoor waterproof case with lock screw.

The device supports 12-57V PoE with 802.3af/at. It is supplied with a PoE injector and power supply. The case has a mounting system that is secured by a screw from inside the lockable case, making the device hard to access by unauthorised individuals.

*Note: SFP module sold separately.
SKU RB-FTC
Manufacturer MikroTik
Manufacturer Product Code RBFTC11

Type Approval Exemption

Specifications Ethernet Ports: 1x 10/100/1000
Max. Power Consumption: 3W
Operating Temperature: -40°C to 70°C
PoE Input: 12V-57V (Passive PoE, 802.3af/at)
PoE Output: None
Power Input: 24V 0.3A Power Supply (Included)
SFP Ports: 1x 1.25Gbps
Supported Voltage Range: 12V-57V

Dimensions: 185 x 85 x 30mm

MikroTik's RB-FTC21 is a weatherproof IP55 Fibre-to-Copper converter with smart management capabilities featuring 2x Gigabit Ethernet Ports and 1x 2.5Gbps SFP Port. The RB-FTC21 runs a full version of SwOS Lite, offering advanced management features and comes with everything you need for installation, including a 48V power adapter, a PoE injector, and a ceiling mount and fastening set.
Specifications Ethernet Ports: 2x 10/100/1000
Max.Power Consumption: 3W
Operating Temperature: -40°C to 70°C
PoE Input: 24-57V (Passive PoE, 802.3af/at)
PoE Output: None
Power Input: 48V 0.95A Power Supply (Included)
SFP Ports: 1x 2.5Gbps
Supported Voltage Range: 24-57V DC & PoE

Dimensions: 254 x 97 x 35 mm

MikroTik's RB-GROOVEA52 is a small, outdoor, fully-featured wireless RouterBOARD powered by RouterOS. It is weatherproof, durable and ready to use. It has one 10/100 Ethernet port with PoE support and a built-in wireless radio. The RB-GROOVEA52 has software selectable 2 or 5GHz wireless mode, and 500mW output power. The GrooveA52 model has 64MB of RAM and RouterOS license (support for AP, point-to-point or CPE)

With the Nv2 TDMA technology, up to 125Mbit aggregate throughput is possible. It has a built-in N-male connector, and pole attachment points, so you can attach it directly to an antenna, or you can use a standard antenna cable. LED signal indicators assist with installation and alignment.

Box contains: Groove unit, mounting loops, PoE injector, power adapter, Omni antenna
Antenna Gain: 2.4GHz/5.8GHz: 6dBi / 8dBi (Detachable)
Beam-width: Antenna Dependent
Data Rate: 2.4GHz/5GHz: 150Mbps
Ethernet Ports: 1x 10/100
Hardware Button: Reset
Max. Power Consumption: 6W
Mounting: Pole-Mount
Operating System: RouterOS (Level 4 Licence)
Operating Temperature: -40°C to 70°C
PoE Input: 9V-30V (Passive PoE)
PoE Output: None
Power Input: 24V 0.8A Power Supply (Included)
Serial Interface: None
SIM Slots: None
Supported Voltage Range: 9V-30V
USB Ports: None

Dimensions: 177 x 44 x 44mm

MikroTik's RB-TAG-IN is a slim Indoor IoT Bluetooth tag with built in accelerometer. Ideal for indoor tracking with the MikroTik KNOT or other IoT asset-tracking installations.
Antenna Gain: 1.5dBi
Battery: 220 mAh
Beam-width: 360°
Bluetooth Version: 5.2
Operating Temperature: 0°C to 70°C
Rating: IP55
Sensors: Accelerometer

Dimensions: 37 x 22 x 6 mm
Weight: 7g

MikroTik LHG 2 (Light Head Grid - 2.4GHz)

The Light Head Grid (LHG) is a compact and light 2.4GHz 802.11b/g/n wireless device with an integrated dual polarization 18 dBi grid antenna at a revolutionary price. It is perfect for point to point links or for use as a CPE at longer distances and supports Nv2 TDMA protocol.

The grid design ensures protection against wind, and the fact that the antenna element is built into the wireless unit means no loss on cables.

The device comes disassembled for compact shipping, but is very easy to assemble and includes a simple to use grounding attachment point. The package also contains a small adapter for tilting the antenna five degrees from the original position.

MikroTik LHG 2 XL (Light Head Grid - 2.4GHz)


The Light Head Grid (LHG) is a compact and light 2.4GHz 802.11b/g/n wireless device with an integrated dual polarization 21 dBi grid antenna for longer distance links. It is perfect for point to point setups or for use as a CPE at longer distances and supports Nv2 TDMA protocol.


The grid design ensures protection against wind, and the fact that the antenna element is built into the wireless unit means no loss on cables.

The device comes disassembled for compact shipping, but is very easy to assemble and includes a simple to use grounding attachment point. The package also contains a small adapter for tilting the antenna five degrees from the original position.

MikroTik LHG 5 (Light Head Grid)

The Light Head Grid (LHG) is a compact and light 5GHz 802.11 a/n wireless device with an integrated dual polarization 24.5 dBi grid antenna at a revolutionary price. It is perfect for point to point links or for use as a CPE at longer distances and supports Nv2 TDMA protocol.

The grid design ensures protection against wind, and the fact that the antenna element is built into the wireless unit means no loss on cables.

The device comes disassembled for compact shipping, but is very easy to assemble and includes a simple to use grounding attachment point. The package also contains a small adapter for tilting the antenna five degrees from the original position.

MikroTik LHG 5 (Light Head Grid)

The Light Head Grid (LHG) is a compact and light 5GHz 802.11 a/n wireless device with an integrated dual polarization 24.5 dBi grid antenna at a revolutionary price. It is perfect for point to point links or for use as a CPE at longer distances and supports Nv2 TDMA protocol.

The grid design ensures protection against wind, and the fact that the antenna element is built into the wireless unit means no loss on cables.

The device comes disassembled for compact shipping, but is very easy to assemble and includes a simple to use grounding attachment point. The package also contains a small adapter for tilting the antenna five degrees from the original position.

MikroTik's RB-LHG5-3 offers 3x RB-LHG5 units in a single package. The RB-LHG5 is a compact and light 5GHz 802.11a/n wireless device with an integrated dual polarization 24.5 dBi grid antenna. It is ideal for point-to-point links or for use as a CPE at longer distances and supports Nv2 TDMA protocol. The grid design ensures protection against wind, and the fact that the antenna element is built into the wireless unit means no loss on cables. The RB-LHG5 supports 5150MHz-5875MHz frequency range.

The 3-pack saves on packing space and is therefore ideal for orders where courier costs are a consideration.
Antenna Gain: 24.5dBi
Beam-width: 7°
Data Rate: 5.8GHz: 300Mbps
Ethernet Ports: 1x 10/100
Hardware Button: Reset
Max. Power Consumption: 6W
Mounting: Pole-Mount
Operating System: RouterOS (Level 3 license)
Operating Temperature: -40°C to 70°C
PoE Input: 11V - 30V (Passive PoE)
PoE Output: None
Power Input: 24V 0.38A Power Supply (Included)
Serial Interface: None
SIM Slots: None
Supported Voltage Range: 11V-30V
USB Ports: None

Dimensions: Ø 391 x 222 mm

MikroTik LHG 5 ac

The LHG 5 ac is a compact and light 5GHz 802.11ac wireless device with an integrated dual polarization 24.5 dBi grid antenna at a revolutionary price. It is perfect for point to point links or for use as a CPE at longer distances and supports Nv2 TDMA protocol.

The device includes one 10/100/1000 Mbit Ethernet port to fully utilize speeds that 802.11ac protocol provides.


This is the LHG 5 ac international version, which supports the 5150MHz-5875MHz range (Specific frequency range can be limited by country regulations).

MikroTik's RB-LHG60 is an outdoor, high-speed 60GHz CPE unit which, can be used to form either a Point-to-Point or Point-to-Multipoint link in the clean 60GHz spectrum. Pair up to 8 units with a MikroTik 60GHz Access Point or create a PtP link at a distance of up to 1.5km. The unit is equipped with a Gigabit Ethernet Port for high-speed connections and is shipped with an LHG mount and aim tool for precision alignment.
Antenna Gain: Maximum of 42dBi
Beam-width: 3°
Data Rate: 60GHz: 1Gbps
Ethernet Ports: 1x 10/100/1000
Hardware Button: Reset
Max. Power Consumption: 7W
Mounting: Pole-Mount
Operating System: RouterOS (Level 3 license)
Operating Temperature: -40°C to 70°C
PoE Input: 12V-57V (Passive PoE; 802.3af/at)
PoE Output: None
Power Input: 24V 0.38A Power Supply (Included)
Serial Interface: None
SIM Slots: None
Supported Voltage Range: 12V-57V
USB Ports: None

Dimensions: Ø 391 x 222mm

MikroTik LHG HP5 (High Powered)

The Light Head Grid (LHG) is a compact and light 5GHz 802.11 a/n wireless device with an integrated dual polarization 24.5 dBi grid antenna at a revolutionary price. The LHG HP5 comes with two times more output power than our regular LHG 5 - up to 630 mW, and is designed to reach up to 60% longer distances. It is perfect for point to point links or for use as a CPE at longer distances and supports Nv2 TDMA protocol.

The grid design ensures protection against wind, and the fact that the antenna element is built into the wireless unit means no loss on cables.

The device comes disassembled for compact shipping but is very easy to assemble. The package also contains a small adapter for tilting the antenna five degrees from the original position.

MikroTik's RB-LHGLTE6 is ideal for remote locations within cellular network coverage. Mount it outdoors, on a pole, mast or any tall structure, to enable connection even where cell phones fail. Due to its large-sized, high-gain antenna, the RB-LHGLTE6 kit can connect to cell towers in extremely rural locations, giving you the ability to provide last mile internet access where nothing else is available.

The RB-LHGLTE6 kit features a Cat6 LTE modem which enables carrier aggregation, allowing a device to use multiple bands simultaneously - A great advantage when there are multiple LTE users in the area. It provides better responsiveness in a crowded environment and higher efficiency in weaker signal situations.
Antenna Gain: LTE 17dBi
Beam-width: 25°
Data Rate: 300 Mbps Downlink; 50 Mbps Uplink
Ethernet Ports: 1x 10/100/1000
Hardware Button: Reset
Max. Power Consumption: 6W
Mounting: Pole-Mount
Operating System: RouterOS (Level 3 License)
Operating Temperature: -30°C to 70°C
PoE Input: 12V – 57V (Passive PoE; 802.3af/at)
PoE Output: None
Power Input: 24V 0.38A Power Supply (Included)
Serial Interface: None
SIM Slots: 1 (Micro SIM)
Supported Voltage Range: 12V-57V
USB Ports: None

Dimensions: 391 x 391 x 227 mm

MikroTik LHG Lite60


The LHG Lite60 is a new model in our 60 GHz lineup. This is a low cost CPE unit for connecting to a 60 GHz AP at longer distances, enabling you to build a cost effective point to multipoint setup in the clean 60 GHz wireless spectrum.


Connect up to eight of these CPE units to a 60 GHz access point, such as our wAP60G AP. For links up to 800 meters, this is the best alternative for wireless connections where 2 and 5 GHz wireless space is crowded and unreliable, at a fraction of the cost. Also, it's possible to make point-to-point link with two LHG Lite60.


Lightweight, compact and very affordable, this is a 60 GHz device like no other before.