MikroTik's RB-4011SRM is a 4 core rack-mount router featuring 10x Gigabit Ethernet Ports, 1x 10Gbps SFP+ port and IPsec hardware acceleration. It is powered by either Passive PoE or DC Jack and can provide PoE Passthrough on Port 10.

*Note: The RB-4011SRM does not support Passive DAC's, 1GB copper SFP modules or SFP GPON modules. It is compatible with our SFP-AOC5.
Ethernet Ports: 10x 10/100/1000
Hardware Button: Reset
Max. Power Consumption: 18W
Mounting: Desktop & Rack-Mount
Operating System: RouterOS (Level 5 Licence)
Operating Temperature: -40°C to 70°C
PoE Input: 18V-57V (Passive PoE)
PoE Output: 18V-57V Passive PoE on Port 10 (Max 600mA @ 18-30V & 420mA @ 30-57V)
Power Input: 24V 1.5A Power Supply (Included)
Processor: 4 Core, Up to 1.4GHz AL21400
Serial Interface:1x RJ45 Serial Port
SFP Ports: 1x 10Gbps
Supported Voltage Range: 12V-57V
System Memory: 1GB
USB Ports: None
Other: None

Dimensions: 228 x 120 x 30m

MikroTik's RB-FTCXG is a 10Gbps Fibre to Copper converter with an IP55 outdoor waterproof case with lock screw. The unit runs a full version of SwOS Lite, and has its own switch-chip, allowing you to perform a variety of tasks such as VLAN support, SNMP reporting and basic traffic shaping.

The device supports 43-57V 802.3bt PoE input and is supplied with a PoE injector and 48V power supply.

*Note: SFP module sold separately.
SKU RB-FTCXG
Manufacturer MikroTik
Manufacturer Product Code FTC11XG
Specifications Ethernet Ports: 1x 10/100/1000 ; 1x 10/100/1000/10000
Max. Power Consumption: 9W
Operating Temperature: -40°C to 70°C
PoE Input: 43V-57V (802.3bt)
PoE Output: None
Power Input: 48V 0.95A Power Supply (Included)
SFP Ports: 1x 10Gbps
Supported Voltage Range: 18V-57V

Dimensions: 254 x 97 x 35 mm

MikroTik's RB-1100AHX4 is a 4 core rack-mount router featuring 13x Gigabit Ethernet ports, 1x Micro SD card slot and sports multiple power options for redundancy. Dual IEC power supplies, PoE input or 2 pin DC terminal.
Ethernet Ports: 13x 10/100/1000
Hardware Button: Reset
Max. Power Consumption: 20W
Mounting: Rack-Mount
Operating System: RouterOS (Level 6 Licence)
Operating Temperature: -40°C to 70°C
PoE Input: 20V-57V (Passive PoE, 802.3af/at)
PoE Output: None
Power Input: 2x IEC Power Cord (Included) (Dual Internal PSU)
Processor: 4 Core 1.4GHz AL21400
Serial Interface: 1x RS232 Port
SFP Ports: None
Supported Voltage Range: 100V-240V
System Memory: 1GB
USB Ports: None
Other: 2-pin Terminal 12V-57V ; 1x microSD Slot

Dimensions: 443 x 148 x 44 mm

MikroTik's RB-951UI2 is a wireless SOHO AP with a new generation Atheros CPU and more processing power. It has five Ethernet ports, one USB 2.0 port and a high power 2.4GHz 1000mW 802.11b/g/n wireless AP with antennas built-in.

It has a 600MHz CPU,128MB of RAM and PoE output function for port #5 - it can power other PoE capable devices with the same voltage as applied to the unit. Maximum load on the port is 500mA.

*Note: Package contains MikroTIk's 951Ui-2HnD in a plastic case and power adapter.
Antenna Gain: 2.5dBi
Beam-width: 360°
Data Rate: 2.4GHz 300Mbps
Ethernet Ports: 5x 10/100
Hardware Button: Reset
Max. Power Consumption: 7W
Mounting: Desktop
Operating System: RouterOS (Level 4 Licence)
Operating Temperature: -20°C to 50°C
PoE Input: 8V-30V (Passive PoE)
PoE Output: Passive PoE Pass-through on Port 5
Supported Voltage Range: 8V-30V
Serial Interface: None
SIM Slots: None
Supported Voltage Range: 9V-30V
USB Ports: 1x USB 2.0
Other: None

Dimensions: 113 x 138 x 29 mm

48 to 24V Gigabit PoE converter


This device lets you use any 48V PoE source (including Passive PoE, Telecom PoE, 802.3af and 802.3at) to power RouterBOARD devices.


Simply plug any 48V PoE powered ethernet cable into one port, and any 8-30V capable RouterBOARD device into the other. This device is capable to provide high power output - up to 24W (up to 1A at 24V).


You can power it with virtually any 42-57V PoE solutions available on market today (Passive, Telecom, 802.3af and 802.3at PoE plus supported)


The device is a rugged metallic design, with high quality components and integrated heatsink design. The case also has mounting holes so you can attach it to a wall.


Ethernet shield pins are inside the Ethernet connectors, so that shielded ethernet can be used, to ground either at the converter itself, or at the devices at both ends. Supports 10/100/1000Mbps Ethernet.

Note: In case if 803.3af compliant PSE is used, total output power should not exceed 12.95w (limited by the 803.3af standard).

MikroTik's RB-5009UPSIN is a 4-core, heavy-duty, desktop router featuring 7x Gigabit Ethernet Ports, 1x 2.5Gbps Ethernet port, 1x 10Gbps SFP+ port and a full-sized USB 3.0 slot. The unit also features PoE-in & PoE-out on all eight Ethernet ports with up to 25W per port. It provides power redundancy and is powered by either Passive PoE, DC Jack or 2-pin DC terminal and can be easily rack-mounted when paired with the RB-5009RMKIT.
Ethernet Ports: 7x 10/100/1000 ; 1x 2.5Gbps
Hardware Button: Reset
Max. Power Consumption: 15W
Mounting: Desktop (Can be rack-mounted with the RB-5009RMKIT)
Operating System: RouterOS v7 only (Level 5 Licence)
Operating Temperature: -40°C to 60°C
PoE Input: 44V-57V (802.3af/at Endspan on Port 1) (Midspan Passive PoE on Ports 2-8)
PoE Output: PoE Passthrough on Ports 1-8
Power Input: 48V 2A Power Supply (Included)
Processor: 4 Core 1.4GHz 88F7040 ARM 64bit
Serial Interface: None
SFP Ports: 1x 10Gbps
Supported Voltage Range: 24-57V (PoE) 24-57V (DC Jack) 24-57 (2-pin terminal)
System Memory: 1GB
USB Ports: 1x USB 3.0
Other: 1x 2-Pin Terminal Connection

Dimensions: 220 x 125 x 22 mm

MikroTik's RB-5009UGSIN is a 4-core, heavy-duty, desktop router featuring 7x Gigabit Ethernet Ports, 1x 2.5Gbps Ethernet port, a 1x 10Gbps SFP+ port and a full-sized USB 3.0 slot. It provides power redundancy and is powered by either Passive PoE, DC Jack or 2-pin DC terminal and can be easily rack-mounted when paired with the RB-5009RMKIT.
Ethernet Ports: 7x 10/100/1000 ; 1x 2.5Gbps
Hardware Button: Reset
Max. Power Consumption: 14W
Mounting: Desktop (Can be rack-mounted with the RB-5009RMKIT)
Operating System: RouterOS v7 Only (Level 5 Licence)
Operating Temperature:-40°C to 60°C
PoE Input: 24V-57V (Passive or 802.3af/at PoE)
PoE Output: None
Power Input: 24V 1.5A Power Supply (Included)
Processor: 4 Core 1.4GHz 88F7040 ARM 64bit
Serial Interface: None
SFP Ports: 1x 10Gbps
Supported Voltage Range: 24V-57V
System Memory: 1GB
USB Ports: 1x USB 3.0
Other: 1x 2-Pin Terminal Connection

Dimensions: 220 x 125 x 22 mm

MikroTik's RB-5009UPSO is a 4-core, heavy-duty, IP66 outdoor router featuring 7x Gigabit Ethernet Ports, 1x 2.5Gbps Ethernet port, 1x 10Gbps SFP+ port and a full-sized USB 3.0 slot. The unit also features PoE-in & PoE-out on all eight Ethernet ports with up to 25W per port, providing power redundancy using either Passive PoE-In or the 2-pin DC terminal.
Ethernet Ports: 7x 10/100/1000 ; 1x 2.5Gbps
Hardware Button: Reset
Max. Power Consumption: 15W
Mounting: Pole Mount
Operating System: RouterOS v7 only (Level 5 Licence)
Operating Temperature: -40°C to 70°C
PoE Input: 24V-57V on Ports 1-8
PoE Output: PoE Passthrough on Ports 1-8
Power Input: 24-57V PoE or 2-pin Terminal
Processor: 4 Core 1.4GHz 88F7040 ARM 64bit
Serial Interface: None
SFP Ports: 1x 10Gbps
Supported Voltage Range: 24-57V
System Memory: 1GB
USB Ports: 1x USB 3.0
Other: 1x 2-Pin Terminal Connection

Dimensions: 220 x 125 x 22 mm

MikroTik's RB-L009UGSRM features a powerful dual-core ARM CPU, 8x Gigabit Ethernet Ports, 1x SFP port supporting both 1.25Gbps and 2.5Gbps as well as a full-sized USB 3.0 port. The unit can be powered by either the included power supply or 24-56V PoE on Port 1. It also features PoE out on port 8 when powered by the DC Jack and ships with a RB-5009RMKIT rack-mount kit.
Ethernet Ports: 8x 10/100/1000
Hardware Button: Reset
Max. Power Consumption: 8W
Mounting: Rack-Mount (with included RB-5009RMKIT)
Operating System: RouterOS (Level 5 Licence)
Operating Temperature: -40°C to 70°C
PoE Input: 24V-56V (Passive or 802.3af/at PoE)
PoE Output: Passive PoE on Port 8 (Only when powered via DC Jack)
Power Input: 24V 1.5A Power Supply (Included)
Processor: 2 Core 800MHz IPQ-5018 ARM 64bit
Serial Interface: RJ45
SFP Ports: 1x 1.25Gbps / 2.5Gbps
Supported Voltage Range: 24V-56V
System Memory: 512MB
USB Ports: 1x USB 3.0

Dimensions: 220 x 125 x 22 mm

MikroTik's RB-L009UGSAX is a 2.4GHz 600Mbps WiFi 6 router featuring a powerful dual-core ARM CPU, 8x Gigabit Ethernet Ports, 1x SFP port supporting both 1.25Gbps and 2.5Gbps as well as a full-sized USB 3.0 port. The unit can be powered by either the included power supply or 24-56V PoE on Port 1. It also features PoE out on port 8 when powered by the DC Jack.
Ethernet Ports: 8x 10/100/1000
Hardware Button: Reset
Max. Power Consumption: 12W
Mounting: Desktop (Can be rack-mounted with the RB-5009RMKIT)
Operating System: RouterOS (Level 5 Licence)
Operating Temperature: -40°C to 70°C
PoE Input: 24V-56V (Passive or 802.3af/at PoE)
PoE Output: Passive PoE on Port 8 (Only when powered via DC Jack)
Power Input: 24V 1.5A Power Supply (Included)
Processor: 2 Core 800MHz IIPQ-5018 ARM 64bit
Serial Interface: RJ45
SFP Ports: 1x 1.25Gbps/ 2.5Gbps
Supported Voltage Range: 24V-56V
System Memory: 512MB
USB Ports: 1x USB 3.0
Other: 2.4GHz: 4dBi 600Mbps

Dimensions: 220 x 125 x 22 mm

MikroTik 8port PoE Smart Switch (RBCRS112-8P-4S-IN)

The MikroTik CRS112-8P-4S-IN is an eight Gigabit RJ45 ports PoE switch, that offers different power output options: autosensing 802.3af/at PoE/PoE+ and Passive PoE, and four SFP ports provide optical fiber connectivity options to support uplinks of up to 1 Gbps.

CRS112-8P-4S-IN is equipped with 12 independent switching ports. 28 V 3.4 A power supply is already included in the box. There is secondary DC jack on the back of the enclosure that supports 48-57 V power supply (not included). CRS112-8P-4S-IN can power 802.3af/at devices if 48-57 V DC input is used (unit will automatically detect and provide correct power to devices). Max current is 1 A per port if input voltage is 18-28 V, 450 mA if 48-57 V. Total limit is 2.8A@24V and 1.4A@48-57V

The MikroTik CRS series combines a fully functional router and a managable switch with L3 features, it’s powered by the familiar RouterOS. All the specific Switch configuration options are available in a special Switch menu, but if you want, ports can be removed from the switch configuration, and used for routing purposes. It gives you all the basic functionality for a managed switch, plus more: allows to manage port-to-port forwarding, apply MAC filter, configure VLANs, mirror traffic, apply bandwidth limitation and even adjust some MAC and IP header fields. IGMP snooping is also supported.

Switching Features:

Non-blocking Layer 2 switching capacity
16K host table
IEEE 802.1Q VLAN
Supports up to 4K simultaneous VLANs
Port isolation
Port security
Broadcast storm control
Port mirroring of ingress/egress traffic
Rapid Spanning Tree Protocol
Access Control List
MikroTik neighbor discovery
SNMP
9204-byte jumbo frames support
IGMP snooping
static link aggregation

Quick Specifications:

8 Gigabit RJ45 Ports
4 SFP Ports
Non-Blocking Throughput: 12 Gbps
Switching Capacity: 24 Gbps
Forwarding Rate: 17.8 Mpps
Maximum Power Consumption: 10 W (without PoE devices connected)
Supports PoE+ IEEE 802.3at/af and 24 V Passive PoE
Quiet, Fanless Operation
Desktop-Rackmount

MikroTik's RB-ATL18 features a Category 18 LTE modem, 1x Micro SIM Slot, 1x Gigabit Ethernet port with PoE-in and 4x4 MIMO support. The unit also supports a wide frequency band with 4x high gain antennas supporting 1.7 – 2.7 GHz and 2x low band antennas supporting 700 MHz – 1 GHz, LTE Band 28
Antenna Gain: Mid Band: 2x 13dBi; 2x 9dBi : Low Band: 2x 3dBi
Data Rate: 1200Mbps Downlink, 150Mbps Uplink
Ethernet Ports: 1x 10/100/1000
Hardware Button: Reset
Max. Power Consumption: 8W
Mounting: Pole-Mount
Operating System: RouterOS v7 (Level 3 License)
Operating Temperature: -40°C to 70°C
PoE Input: 802.3af/at
PoE Output: None
Power Input: 24V 0.8A Power Supply (Included)
Serial Interface: None
SIM Slots: 1 (Micro SIM)
Supported Voltage Range: 12V-57V
USB Ports: None
Other: 1 Mini PCIe

Dimensions: Ø 315 mm x 170mm

MikroTik's RB-GPS is an active GPS antenna for the 1575.4 MHz GPS frequency. The antenna is waterproof with IP67 rating and includes a 5m cable which allows you to bring the antenna outside and mount it with the included magnet, or double-sided tape. When paired with the RB-LTAP, it provides accurate geographical coordinates of your router, even when it is mounted indoors.
Antenna Gain: 26dBi
Beam-width: 360°
Connector: SMA Male
Frequency Range: 1575.42Mhz (Center Frequency)
Polarization: Vertical & Horizontal

Dimensions: 46.5 x 46.5 x 12.5mm
Weight: 120g

MikroTik's RB-AUD52 is a tri-band (1x 2.4GHz & 2x 5GHz) home access point with meshing technology. If you are looking for a Wi-Fi solution to cover a large building with all kinds of obstacles, simply add more Audience devices to your network. With a press of a button, they will seamlessly sync and create a single Wi-Fi network. The initial setup is extremely simple: Download the iOS or Android MikroTik app and it will connect to the router, guiding you through a quick, effortless setup process.

*Note: This version does not support LTE.
Antenna Gain: 2.4GHz: 3.5dBi 5.8GHz(x2): 4.5dBi
Beam-width: 360°
Data Rate: 2.4GHz: 300Mbps 5.8GHz(1): 867Mbps 5.8GHz(2) 1733Mbps
Ethernet Ports: 2x 10/100/1000
Hardware Button: Reset
Max. Power Consumption: 27W
Mounting: Desktop
Operating System: RouterOS (Level 4 Licence)
Operating Temperature: -30°C to 60°C
PoE Input: 24V-57V (Passive PoE; 802.3af/at)
PoE Output: None
Power Input: 24V 1.5A Power Supply (Included)
Serial Interface: None
SIM Slots: None
Supported Voltage Range: 12V-57V
USB Ports: None
Other: None

Dimensions: 251 x 129 x 39mm

MikroTik's RB-BASEBOX2 is an outdoor 2.4Ghz wireless device, based on MikroTik's popular RB912 model, fitted with two SMA connectors for antennas, and a cable hood for protection against moisture. Also available are three additional places for antenna connectors, should you wish to use the BaseBox miniPCIe slot for one more wireless interface to make a dual-band device or a 3G/4G modem.

The case can be opened with one hand and is protected against the elements. USB, Ethernet, and a Grounding wire exits are provided on the bottom, behind a protective door.

It comes with a mounting loop for tower/pole mounting, and a separate DIN rail mount is also provided. Package also includes a PoE injector and power supply unit.
Antenna Gain: Antenna Dependent (2x SMA RP Female)
Beam-width: Antenna Dependent
Data Rate: 2.4GHz 300Mbps
Ethernet Ports: 1x 10/100/1000
Hardware Button: Reset
Max. Power Consumption: 14W
Mounting: Pole Mount
Operating System: RouterOS (Level 4 Licence)
Operating Temperature: -40°C to 70°C
PoE Input: 8V-30V (Passive PoE)
PoE Output: None
Power Input: 24V 0.8A Power Supply (Included)
Serial Interface: None
SIM Slots: 1 (Mini SIM) Requires 3G miniPCI-e card
Supported Voltage Range: 8V-30V
USB Ports: 1x USB 2.0
Other: 1x MiniPCI-e Slot

Dimensions: 246 x 135 x 50mm

MikroTik's RB-BASEBOX5 is an outdoor enclosure, fit with two SMA connectors for antennas, and a cable hood for protection against moisture.

Also available are three additional places for antenna connectors, in case you wish to use the RB912 miniPCIe slot for one more wireless interface to make a dual-band device.

Compatible with ANT-D530PA, a 5GHz, 30dBi dish antenna, also by MikroTik

The case can be opened with one hand, and is protected against the elements. USB, Ethernet, and a Grounding wire exits are provided on the bottom, behind a protective door. It comes with a mounting loop for tower/pole mounting, and a separate DIN rail mount is also provided.

Package also includes a PoE injector and power supply unit.
Antenna Gain: Antenna Dependent (2x SMA RP Female)
Beam-width: Antenna Dependent
Data Rate: 5GHz 300Mbps
Ethernet Ports: 1x 10/100/1000
Hardware Button: Reset
Max. Power Consumption: 14W
Mounting: Pole Mount
Operating System: RouterOS (Level 4 Licence)
Operating Temperature: -40°C to 70°C
PoE Input: 8V-30V (Passive PoE)
PoE Output: None
Power Input: 24V 0.8A Power Supply (Included)
Serial Interface: None
SIM Slots: 1 (Mini SIM) Requires 3G miniPCI-e card
Supported Voltage Range: 8V-30V
USB Ports: 1x USB 2.0
Other: 1x MiniPCI-e Slot

Dimensions: 246 x 135 x 50mm

MikroTik CCR1016-12S-1S+ Cloud Core Router


The MikroTik CCR1016 is an industrial grade router with cutting edge 16-core Tilera CPU. If you need to process millions of packets per second the Cloud Core Router is your best choice.

This model has twelve SFP ports and one SFP+ port for 10G connectivity. It is available in a 1U rackmount case and also has a serial console port, a touchscreen LCD and a USB port.

The CCR1016-12S-1S+ comes with redundant power supplies and one RJ45 SFP 10/100/1000M copper module.

Product features:

12x SFP ports for 1 Gigabit connectivity
1x SFP+ port for 10 Gigabit connectivity
16 core Tilera CPU, 1.2GHz clock per core
12 Mbytes total on-chip cache
State of the art TILE GX architecture
Ports directly connected to CPU
1U rackmount case
Color touchscreen LCD display
two power supplies for redundancy

RouterBoard Specs
RouterBoard CPU Tilera Tile-Gx16 CPU (16-cores, 1.2Ghz per core)
Memory 2 GB
Wired Interfaces 12x SFP ports / 1x SFP+ Port / 1x MicroUSB / 1x Serial port
DC Power No, 2x 110/220V AC Input (two redundant PSUs)
PoE No
RouterBoard License Level 6
Operating System RouterOS

Like the other models in CCR2004 series, this CCR also features the Amazon Annapurna Labs Alpine v2 CPU with 4x 64-bit ARMv8-A Cortex-A57 cores. While this CPU is running at 1.2 GHz, the router can be 3x as fast than the previous generation CCR’s. This is the silent powerhouse. Enjoy all the power of a real CCR in peace and quiet. Get rid of all the hum and buzz in your office, studio, server room or homelab without sacrificing the performance!

The new router has 18 wired ports, including 16x Gigabit Ethernet ports and two 10G SFP+ cages. It also has a RJ-45 console port on the front panel.

Each group of 8 Gigabit Ethernet ports is connected to a separate Marvell Amethyst family switch-chip. Each switch chip has a 10 Gbps full-duplex line connected to the CPU. The same goes for each SFP+ cage - a separate 10 Gbps full-duplex line. Boards come with 4GB of DDR4 RAM and 128MB of NAND storage.

So as you can see - no bottlenecks. As long as the CPU can handle the processing, all ports can reach wire speed. And this CPU is a beast that can handle a lot. If we look at the performance, you can see that it is trading blows with our CCR1009.

The best part? This brand new CCR is among the most affordable options out there - not only within the CCR series, but on the market in general. One of the most common ways to use this device would be: Gigabit Ethernet ports for the internal network; SFP+ ports for downlink and uplink. The perfect all-in-one solution for small and medium-sized businesses. Easy and efficient.


With the new CCR2004, you can take your office network to the next level. Without breaking the bank.

The “Improvise. Adapt. Overcome.” mindset can be very helpful, but sometimes you simply need a device that works and solves the problem without additional tinkering. The CCR2004-1G-12S+2XS does just that – forget about all connectivity troubles and expand your setup in any way you please. This handy router features 12 x 10G SFP+ and 2 x 25G SFP28 ports.

CCR2004-1G-12S+2XS is our router with the most powerful single-core performance so far. It provides incredible results in single tunnel (up to 3.4 Gbps) and BGP feed processing.

Be prepared for anything: 10G, 40G and now 25G! Paired with such MikroTik multiport products as CRS317-1G-16S+RM, CRS312-4C+8XG-RM and CRS326-24S+2Q+RM, your networking setup will know no bounds. Performance-wise, CCR2004-1G-12S+2XS is on par with the renowned CCR1009/CCR1016 routers. And with dual redundant power supply you can forget about unexpected downtime! With its elaborate port configuration, the new CCR2004-1G-12S+2XS is the perfect addition to any professional networking arsenal – it will save you tons of time in some tricky situations!

*Please note that only 1792MB ECC RAM is accessible when running RouterOS v6, while the full 4GB ECC RAM is accessible when running RouterOS v7.

We wanted to see the full potential of the good, old, reliable 10G networking combined with a modern CPU. CCR2116-12G-4S+ allows you to forget about CPU limitations in your setup. Like its younger brother – the amazing CCR2004, this router features the mighty Amazon Annapurna Labs Alpine CPU.


But with 16 cores running at 2 GHz, this CCR eats the other one for breakfast. For example, we see at least a 15% increase in single-core performance. And that is the most important aspect when it comes to heavy operations based on per-connection processing. Like queues, for example. CCR2116-12G-4S+ sets a new standard of single-core performance in the whole CCR product family! And it supports Layer 3 Hardware Offloading!


Obviously, you need the right connectivity to harness this power. There are four 10G SFP+ ports. They have a separate, full-duplex line connected to the Marvell Aldrin family switch chip. Then we have Gigabit Ethernet ports. 12 of them are running through the Marvel chip. And there is another Gigabit port connected directly to the CPU. For management purposes.


Each group of 4 ports has a separate full-duplex connection to the switch chip. No bottlenecks here. You can expect switch-like throughput in most setups. The new generation of processors offers mind-blowing performance. If we look at the CCR1036 - the powerhouse with a 36 core CPU, the new CCR2116 can easily double the performance. 16 cores vs 36 cores. Double the performance. Or even more.


If you are a rather large ISP, dealing with dynamic routing, massive BGPs, complex firewall rules, and intricate quality of service configurations. This is the right device for you. Combination of raw power and utility with the reliable 10G networking. And yes, like with any ISP-level device, we’ve included a dual-redundant power supply. So you have one less thing to worry about.


CCR2116-12G-4S+: technology tested by time, built for the future.