Ubiquiti's UACC-MM10G allows for multi-mode fibre connections delivering up to 10Gbps speeds at distances of up to 300m.

*Note: The price reflected is for a pair (one box of 2 units). This product is only sold as a pair and no single units are available.

Ubiquiti's UCG-ULTRA is a powerful and compact multi-WAN UniFi Cloud Gateway with a full suite of advanced routing and security features. The unit runs UniFi Network for full-stack network management and features 4x Gigabit Ethernet ports, 1x 2.5Gbps WAN Port, a quad-core 1.5GHz CPU, 0.96" LCM status display and Multi-WAN load balancing.

It can be configured and managed with the UniFi Network Application.
Ethernet Ports: 3x 10/100/1000 (LAN); 1x 10/100/1000 (LAN / WAN);1x 10/100/1000/2500 (WAN)
Hardware Button: Reset
Max. Power Consumption: 6.2W
Mounting: Desktop
Operating System: UniFi
Operating Temperature: -10°C to 40°C
PoE Input: None
PoE Output: None
Power Input: 1x 5V 3A USB Power Adapter (Included);
Processor: Quad-core ARM® Cortex®-A53 at 1.5 GHz
Serial Interface: None
SFP Ports: None
Supported Voltage Range: 5V 3A via USB
System Memory: 3 GB DDR4
USB Ports: None

Dimensions: 141.8 x 127.6 x 30 mm
Weight: 0.52kg

Ubiquiti's UCG-ULTRA is a powerful and compact multi-WAN UniFi Cloud Gateway with a full suite of advanced routing and security features. The unit runs UniFi Network for full-stack network management and features 4x Gigabit Ethernet ports, 1x 2.5Gbps WAN Port, a quad-core 1.5GHz CPU, 0.96" LCM status display and Multi-WAN load balancing.

It can be configured and managed with the UniFi Network Application.

Ethernet Ports: 3x 10/100/1000 (LAN); 1x 10/100/1000 (LAN / WAN);1x 10/100/1000/2500 (WAN)
Hardware Button: Reset
Max. Power Consumption: 6.2W
Mounting: Desktop
Operating System: UniFi
Operating Temperature: -10°C to 40°C
PoE Input: None
PoE Output: None
Power Input: 1x 5V 3A USB Power Adapter (Included);
Processor: Quad-core ARM® Cortex®-A53 at 1.5 GHz
Serial Interface: None
SFP Ports: None
Supported Voltage Range: 5V 3A via USB
System Memory: 3 GB DDR4
USB Ports: None

Dimensions: 141.8 x 127.6 x 30 mm
Weight: 0.52kg

Ubiquiti Single Mode (LC) SFP Module Pair
The UF-SM1G is ideal for long-distance, outdoor, bi-directional, single-mode fiber runs for distances of up to 3 km at 1 Gbps.
Outdoor Fiber Installations
For long-distance runs of 300+ meters, use UFiber 1G single-mode modules for maximum reuse of existing infrastructure.
UF-SM-1G-S
Supported Media Single-Mode Fiber
Connector Type (1) LC
BiDi ✓
TX Wavelength Blue1310 nm Yellow1550 nm
RX Wavelength Blue 1550 nm Yellow 1310 nm
Data Rate 1.25 Gbps SFP
Cable Distance 3 km
Pack Options 1-Pair

Ubiquiti's UACC-SM1GS is ideal for long-distance, bi-directional, single-mode connections. It can deliver up to 1.25Gbps speeds at distances of up to 3km.

These SFP modules make use of Wavelength-Division Multiplexing (WDM). This means it uses two different light wavelengths to transmit data in both directions at once, resulting in fewer fibre cables required to run. It also aids in maximising the use of existing infrastructure and simplifying installations.

*Note: The price reflected is for a pair (one box of 2 units). This product is only sold as a pair and no single units are available.

Ubiquiti's UACC-SM10G allows for long-distance, single-mode fibre connections. It can deliver up to 10Gbps speeds at distances of up to 10km.

*Note: The price reflected is for a pair (one box of 2 units). This product is only sold as a pair and no single units are available.

Ubiquiti's UF-TBOX is an outdoor IPX5, weatherproof, pole-mountable enclosure for UFiber devices. This heavy-duty enclosure features a screw-lock design and includes a pole-mounting kit.

*Note: Compatible with UF-LOCO and UF-AE.
SKU UF-TBOX
Manufacturer Ubiquiti
Manufacturer Product Code UF-TERMINAL-BOX
Specifications Compatibility: UF-LOCO ; UF-AE
Material: UV stabilized polycarbonate

Dimensions: 249 x 218 x 60 mm
Weight: 680g

Ubiquiti's UISP-HORN is a 5GHz 19dBi, 30° high isolation horn antenna designed to seamlessly integrate with Ubiquiti radios. The antenna covers a wide frequency range and with low back lobes. It is ideal for co-location deployments.

*Note: Radio not Included.
Antenna Gain: 19.5dBi
Beam-width: 30°
Connector: WaveGuide Adapter (Included)
Frequency Range: 5.15 - 6.875GHz
Polarization: Vertical & Horizontal
Wind Loading: 90N @ 200km/h

Dimensions: 282 x 224 x 380 mm
Weight: 3.98kg

Ubiquiti's WAVE-APM is a UISP 60GHz Point-to-MultiPoint Access Point featuring 5GHz failover, 1x 2.5Gbps Ethernet Port and an integrated GPS antenna. Utilising 60GHz point-to-multipoint technology, it can connect up to 15 stations with a total throughput of 5Gbps at distances of up to 900m when paired with the WAVE-PICO, 4km when paired with the WAVE-NANO, and 6km when paired with the WAVE-LR. Mount up to 4x WAVE-APM using the WAVE-MM mounting for full 360° coverage.

The dedicated Bluetooth radio allows for easy set-up via the UISP network management platform.
Antenna Gain: 60GHz: 20dBi ; 5.8GHz: 13.5dBi
Beamwidth: 60GHz/5GHz: 90°
Data Rate: 60GHz: Up to 5.4Gbps ; 5.8GHz: 800Mbps
Ethernet Ports: 1x 2.5Gbps
Hardware Button: Reset
Max. Power Consumption: 24W
Mounting: Pole-Mount, or WAVE-MM for 360° coverage
Operating System: airOS
Operating Temperature: -40°C to 60°C
PoE Input: 24V or 48V Passive PoE
PoE Output: None
Power Input: 48V 0.65A 2.5GbE PoE Injector (included)
Serial Interface: None
SIM Slots: None
Supported Voltage Range: 44–54V or 22–27V
USB Ports: None

Dimensions: 284 x 156 x 76 mm
Weight: 1.3kg

Ubiquiti's WAVE-AP is a UISP 60GHz Point-to-MultiPoint Access Point featuring 5GHz failover, 1x 10Gbps SFP+ Port, 1x 2.5Gbps Ethernet Port and an integrated GPS antenna. Utilizing 60GHz point-to-multipoint technology, it can connect up to 15 stations with a total throughput of 5.4Gbps at distances of up to 1.3km when paired with the WAVE-PICO, 5km when paired with the WAVE-NANO, and 8km when paired with the WAVE-LR.

The dedicated Bluetooth radio allows for easy set-up via the UISP network management platform.
Antenna Gain: 60GHz: 24dBi ; 5.8GHz: 12dBi
Beamwidth: 60GHz/5GHz: 30°
Data Rate: 60GHz: Up to 5.4Gbps ; 5.8GHz: 800Mbps
Ethernet Ports: 1x 2.5Gbps
Hardware Button: Reset
Max. Power Consumption: 24W
Mounting: Pole-Mount
Operating System: airOS
Operating Temperature: -40°C to 60°C
PoE Input: 24V or 48V Passive PoE
PoE Output: None
Power Input: 48V 0.65A 2.5GbE PoE Injector (included)
Serial Interface: None
SIM Slots: None
Supported Voltage Range: 44–54V or 22–27V
USB Ports: None
Other: 1x SFP+

Dimensions: 212 x 205 x 187mm
Weight: 2.3kg

Ubiquiti's WAVE-LR is a long-range 60GHz radio system with an integrated high-gain antenna, GPS, precision mount bracket, and a 5GHz backup radio. It features Wave technology with true duplex gigabit performance PtP links up to 15 km. In PtMP mode, it can be used as a CPE and paired with the WAVE-AP (up to 8km) or WAVE-APM (6km) with a total throughput of up to 2Gbps.

Also included is a built-in Bluetooth management radio for easy setup via the UISP network management platform. An alignment tool is included with the unit to assist with accurate and reliable aligning of the antennas.

*Note: For PtP links, firmware v.3.2.0 or later is required.
Antenna Gain: 60GHz: 46dBi ; 5.8GHz: 22dBi
Beamwidth: 60GHz: 1.1° ; 5GHz: 10°
Data Rate: 60GHz: Up to 2Gbps ; 5.8GHz: 800Mbps
Ethernet Ports: 1x 10/100/1000
Hardware Button: Reset
Max. Power Consumption: 18W
Mounting: Pole-Mount
Operating System: airOS
Operating Temperature: -40°C to 60°C
PoE Input: 24V or 48V Passive PoE
PoE Output: None
Power Input: 48V 0.65A Gigabit PoE Injector (included)
Serial Interface: None
SIM Slots: None
Supported Voltage Range: 24V or 48V
USB Ports: None

Dimensions: Ø424.4 x 166.2mm
Weight: 2.59kg

Ubiquiti's WAVE-NANO is a 60GHz radio system with an integrated high-gain antenna, GPS, and a 5GHz backup radio. It features Wave technology with true duplex gigabit performance PtP links up to 12 km. In PtMP mode, it can be used as a CPE and paired with the WAVE-AP (up to 5km) or WAVE-APM (4km) with a total throughput of up to 2Gbps.

Also included is a built-in Bluetooth management radio for easy setup via the UISP network management platform. An alignment tool is included with the unit to assist with accurate and reliable aligning of the antennas.

*Note: For PtP links, firmware v.3.2.0 or later is required.

Antenna Gain: 60GHz: 41dBi ; 5.8GHz: 19dBi
Beamwidth: 60GHz: 1° ; 5GHz: 17°
Data Rate: 60GHz: Up to 2Gbps ; 5.8GHz: 800Mbps
Ethernet Ports: 1x 10/100/1000
Hardware Button: Reset
Max. Power Consumption: 18W
Mounting: Pole-Mount
Operating System: airOS
Operating Temperature: -40°C to 60°C
PoE Input: 24V or 48V Passive PoE
PoE Output: None
Power Input: 48V 0.65A Gigabit PoE Injector (included)
Serial Interface: None
SIM Slots: None
Supported Voltage Range: 24V or 48V
USB Ports: None

Dimensions: Ø256.5 x 113.5 mm
Weight: 1.2kg

Ubiquiti's WAVE-PICO is a 60GHz radio system with an integrated high-gain antenna, and a WiFi 6, 5GHz backup radio. It features Wave technology with true duplex gigabit performance PtP links up to 3km. In PtMP mode, it can be used as a CPE and paired with the WAVE-AP (up to 1.3km) or WAVE-APM (900m) with a total throughput of up to 2Gbps.

Also included is a built-in Bluetooth management radio for easy setup via the UISP network management platform. An alignment tool is included with the unit to assist with accurate and reliable aligning of the antennas.

*Note: For PtP links, firmware v.3.2.0 or later is required.
Antenna Gain: 60GHz: 27.7dBi ; 5.8GHz: 9dBi
Beamwidth: 60GHz: 6° ; 5GHz: 50°
Data Rate: 60GHz: Up to 2Gbps ; 5.8GHz: 800Mbps
Ethernet Ports: 1x 10/100/1000
Hardware Button: Reset
Max. Power Consumption: 10W
Mounting: Pole-Mount
Operating System: airOS
Operating Temperature: -40°C to 60°C
PoE Input: 24V or 48V Passive PoE
PoE Output: None
Power Input: 48V 0.5A, Gigabit PoE Injector (Included)
Serial Interface: None
SFP Ports: None
SIM Slots: None
Supported Voltage Range: 44–54V or 22–27V Passive PoE
USB Ports: None

Dimensions: Ø152.1 x 55.8 mm
Weight: 347g

Ubiquiti's WAVE-PRO is a high-capacity 60GHz radio system with 5GHz backup radio, an integrated high-gain antenna, 2x 2.5Gbps Ethernet Ports, 1x 10Gbps SFP+ as well as integrated GPS and precision mount bracket. It features Wave technology with true duplex gigabit performance PtP links up to 15 km. In PtMP mode, it can be used as a CPE and paired with the WAVE-AP (up to 8km) or WAVE-APM (6km) with a total throughput of up to 5.4Gbps.

Also included is a built-in Bluetooth management radio for easy setup via the UISP network management platform. An alignment tool is included with the unit to assist with accurate and reliable aligning of the antennas.

*Note: For PtP links, firmware v.3.2.0 or later is required.
Antenna Gain: 60GHz: 46dBi ; 5.8GHz: 22dBi
Beamwidth: 60GHz: 1.3° ; 5GHz: 8°
Data Rate: 60GHz: Up to 5.4Gbps ; 5.8GHz: 800Mbps
Ethernet Ports: 2x 10/100/1000/2500
Hardware Button: Reset
Max. Power Consumption: 26W
Mounting: Pole-Mount
Operating System: airOS
Operating Temperature: -40°C to 60°C
PoE Input: 44–54V or 22–27V Passive PoE
PoE Output: None
Power Input: 48V 0.65A Gigabit PoE Injector (included)
Serial Interface: None
SIM Slots: None
Supported Voltage Range: 44–54V or 22–27V
USB Ports: None
Other: 1x SFP+

Dimensions: Ø424.4 x 166.2mm
Weight: 4kg

Ubiquiti's UISP-CON is a UISP Console with the pre-installed UISP application which features a built-in switch with 8x Gigabit Ethernet Ports and 1x 10Gbps SFP+ Port. It also offers 1x 10Gbps SFP+ and 1x Gigabit Ethernet WAN connections and can be wall or rack mounted with the included kit.
Ethernet Ports: 8x 10/100/1000 (LAN) 1x 10/100/1000 (WAN)
Hardware Button: Reset
Max. Power Consumption: 30W
Mounting: Desktop, Wall or Rack-Mount
Operating System: UISP
Operating Temperature: -10°C to 50°C
PoE Input: None
PoE Output: None
Power Input: 24V 2.5A power supply (Included)
Processor: Quad-Core 1.7 GHz ARM® Cortex®-A57
Serial Interface: None
SFP Ports: 1x 10Gbps (LAN) 1x 10Gbps (WAN)
Supported Voltage Range: 24-28V
System Memory: 4 GB DDR4
USB Ports: None
Other: 1x MicroSD card slot

Dimensions: 210.4 x 140.2 x 43.7 mm
Weight: 1.5kg

Ubiquiti's ER-6P is a professional 5 port Gigabit Ethernet router with SFP connectivity. Based on EdgeOS, it contains a quad-core, 1Ghz processor and 24v PoE out. It is designed for ISP (internet service provider) or SME (small to medium enterprise) deployments which require advanced routing features. It can be managed via the UISP network management platform.
Ethernet Ports: 5x 10/100/1000
Hardware Button: Reset
Max. Power Consumption: 16W
Mounting: Wall Mount or Desktop
Operating System: EdgeMAX
Operating Temperature: -10°C to 50°C
PoE Input: None
PoE Output: 24V Passive PoE Output on Ports 0~4
Power Input: 24V 2.5A Power Supply (Included)
Processor: 4-Core 1GHz; MIPS64
Serial Interface:1x RJ45 Serial Port
SFP Ports: 1x 1.25Gbps
Supported Voltage Range: 16 - 30VDC
System Memory: 1GB DDR3 RAM
USB Ports: 1x USB 3

Dimensions: 229 x 136.5 x 31.1 mm
Weight: 730 g

Ubiquiti's ES24-250 is a managed 24 port Gigabit PoE switch with SFP connectivity. It features 802.3af/at PoE as well as passive 24v PoE on all Ethernet ports with a maximum budget of 230W. L2/L3 functionality makes them suitable for a wide range of high performance applications. It can be managed via the UISP network management platform.

Ethernet Ports: 24x 10/100/1000
Hardware Button: Reset
Max. Power Consumption: 30W
Mounting: Desktop or Rack-Mount
Operating System: EdgeMAX
Operating Temperature: -5°C to 40°C
PoE Input: None
PoE Output: 802.3af/at or 24V Passive PoE on Ports 1~24
Power Input: 1x IEC Power Cord (Included)
Serial Interface: 1x RJ45 Ethernet In/Out Band
SFP Ports: 2x 1.25Gbps
Supported Voltage Range: 100V-240V

Dimensions: 485 x 43.7 x 285.4mm
Weight: 4.7Kg

Ubiquiti's ES48-500 is a managed 48 port Gigabit PoE switch with SFP+ connectivity. It features 802.3af/at PoE as well as passive 24v PoE on all Ethernet ports with a maximum budget of 436W. L2/L3 functionality makes them suitable for a wide range of high performance applications. It can be managed via the UISP network management platform.

Ethernet Ports: 48x 10/100/1000
Hardware Button: Reset
Max. Power Consumption: 64W
Mounting: Desktop or Rack-Mount
Operating System: EdgeMAX
Operating Temperature: -5°C to 40°C
PoE Input: None
PoE Output: 802.3af/at or 24V Passive PoE on Ports 1~48
Power Input: 1x IEC Power Cord (Included)
Serial Interface: 1x RJ45 Ethernet In/Out Band
SFP Ports: 2x 10Gbps ; 2x 1.25Gbps
Supported Voltage Range: 100V-240V

Dimensions: 485 x 43.7 x 374.6mm
Weight: 6.1Kg

Ubiquiti's ES8-150 is a managed 8 port Gigabit PoE switch with SFP connectivity. It features 802.3af/at PoE as well as passive 24v PoE on all Ethernet ports with a maximum budget of 130W. L2/L3 functionality makes them suitable for a wide range of high performance applications. It can be managed via the UISP network management platform.
Ethernet Ports: 8x 10/100/1000
Hardware Button: Reset
Max. Power Consumption: 20W
Mounting: Desktop
Operating System: EdgeMAX
Operating Temperature
PoE Input: None
PoE Output: 802.3af/at or 24V Passive PoE on Ports 1~8
Power Input: 1x IEC Power Cord (Included) Or 42V to 56V DC input with Terminal Block
Serial Interface: 1x RJ45 Ethernet In/Out Band
SFP Ports: 2x 1.25Gbps
Supported Voltage Range: 100V-240V

Dimensions: 204 x 43 x 235mm
Weight: 1.8Kg

Ubiquiti's UF-OLT-4 is a fibre solution that anyone can deploy. No command lines, manuals or paid support licenses are required. UISP offers internet and telecom service providers a cost-effective fibre optic delivery system for Triple Play Services (data, voice, IPTV/VoD). The UISP Fiber OLT 4 features four PON ports to connect up to 512 ONUs. The SFP+ port delivers up to 10 Gbps of uplink connectivity. The 1U-high metal chassis allows for convenient mounting in a standard-sized, 19" wide rack.

It can be managed via the UISP network management platform.

*Note: 1x UF-GP-B+ included.
Ethernet Ports: None
Hardware Button: Reset
Max. Power Consumption: 35W
Mounting: Rack-Mount
Operating System: UFiber
Operating Temperature: -10°C to 45°C
PoE Input: None
PoE Output: None
Power Input: 1x IEC Power Cord (Included) ; 24VDC (Not Included)
Processor: MIPS 1004kc; 880 MHz Dual Core
Serial Interface: 1x RJ45 Serial Console Port
SFP Ports: 4x 2.5/1.25Gbps GPON Ports ; 1x 10Gbps
Supported Voltage Range: 24V or 100V – 240V
System Memory: 512 MB DDR3; 512 MB NAND
USB Ports: 1x USB 2.0

Dimensions: 299.80 x 258.95 x 42.55mm
Weight: 2.13kg